How can we really distinguish the good quality and secondary quality of cable and wire-Huawei Cable Co., Ltd|Power Cable|Mining cable

Quality+Innovation Huawei Cable Co., Ltd

3457899523@qq.com

+86-0319-5982835

Home
About Huawei
Products
News
Service
Contact Us



Home

How can we really distinguish the good quality and secondary quality of cable and wire

Release time:

2023-07-21

Foot meters may be more difficult to detect in meters, because customers generally do not have the equipment to actually measure meters, and the same weighing method can be used to know whether the cable is full meters. Or it is also a good way to print the meter mark when the factory produces, but it should be noted that there is no way to print the meter mark for lines with a diameter of less than 5mm.

How can we really distinguish the good quality and secondary quality of cable and wire

foot meters may be more difficult to detect in meters, because customers generally do not have the equipment to actually measure meters, and the same weighing method can be used to know whether the cable is full meters. Or it is also a good way to print the meter mark when the factory produces, but it should be noted that there is no way to print the meter mark for lines with a diameter of less than 5mm.

foot copper is a precious metal, if the copper diameter on the loss of a little, can reduce a lot of raw material costs, so you need to use a micrometer to measure the diameter of copper wire. If you don't have a micrometer, then an easier way is to weigh the entire coil of wire to see if it is much lighter than a high-quality cable. Or you can refer to the nominal weight given by the factory. Some factories give the nominal weight is low, naturally can not guarantee the quality of the product.

How to Distinguish the Internal Quality of Wire and Cable:

High-quality copper cables use high-purity oxygen-free copper, with bright copper core and dim copper wire surface.

extruder

plastic plastic uses high-quality virgin plastic, which has good bending performance and will not produce texture when bending the cable. Poor recycled plastic will have obvious texture after bending several times and will break after bending many times.

cable equipment

accessories in order to ensure the roundness of the cable, for multi-core cables, filler will be added to the core, and the thickness of the sheath is relatively thick. if the cable in hand is not round, it means that the filler is added very little and the sheath is thin.

Cable Equipment

Bundle Wire Multi-strand Copper Wire will be bundled during production to improve the tensile performance, roundness, electrical performance and tightness with the insulation layer of the copper core. However, due to the increase in the amount of copper used, many factories omit this step. The method of distinguishing is to cut off the core wire of the cable and see if the copper wires inside are regularly stranded together.

braided cable with copper mesh braid, braid layer accounts for a large part of the cost of cable raw materials, and the coverage of the braid layer directly affects the electrical performance of the cable. At the same time, the tight braid layer can increase the strength of the cable, The wire and cable reduce the decline of the electrical performance of the cable in the bent state. Therefore, to see whether the braided layer has high coverage and uniform and fine weaving is an important means to distinguish the advantages and disadvantages of cables.

Key words:

Reasons for Appearance Defect of Rubber Sleeve Cable

None

Reasons for Appearance Defect of Rubber Sleeve Cable

None